Dante unD6IO Overview

Dante unD6IO thumbnail
  • SUMMARY - A 4-in, 2-Out I/O Interface that is a convenient, cost-effective way to add up to 6 channels of Dante audio to an existing Dante-based networked audio system.
  • INPUTS - 2 XLR input with switchable mic/line gain and switchable phantom power on the inputs. Choice of unbalanced input (RCA or 3.5mm stereo jack) selectable by software.
  • OUTPUTS - 1 3.5mm output, and two balanced outputs on a side‐mounted depluggable connector with software controlled volume.
  • CONTROL - Audio flow assignment, input gain, phantom power and unbalanced input selection are all controllable via the Dante network connection.

Firmware Compatibility Note: Two versions of firmware are available for this product that each support a different control method. Click this link for further details.

Audio routing note: The input configuration can be modified using the unIFY Control Panel software or other compatible controllers. Audio from either Input 3A+4A or Input 3B+4B can be chosen as the input source for Dante TX channels 3 and 4. Audio from Dante output channels 1 and 2 is sent to Output 1 and 2, respectively, and simultaneously to the in-wall balanced outputs. The following diagram illustrates the internal audio signal path of the unD6IO.